Epson WorkForce DS-30 Driver Software for Windows 10, 8, 7 Scanner Downloads

Posted on

Epson WorkForce DS-30 Driver Software for Windows 10, 8, 7 Scanner Downloads – One remarkable distinction in between that and even similar portability of five and even more years earlier is the scanning energy with the option to send out the checked files to the cloud. Whether you require absolute comfort or otherwise, if your scanning needs are lightweight enough that you can do so without a computerized record scanner (ADF) and duplex scanning (two-sided), the Epson WorkForce DS-30 deserves thinking about. The benefits of leaving duplexing and also ADF boil down to little dimension, low weight, as well as low price. The Epson WorkForce DS-30 is only 1.4 times 10.9 by 2.0 inches (HWD), offering a smaller sized impact than the one-foot leader, and also considers 11.2 ounces. Comparative, the Canon imageFormula P-150 Check Editor selection-Tini ($295 Direct, four celebrities), with the duplexing as well as ADF, is nearly two times as massive as well as evaluates three times if you require the very best transportability possible, which offers a side on the DS-30.

Epson WorkForce DS-30 Driver Software for Windows 10, 8, 7 Scanner Downloads
Epson WorkForce DS-30 Driver Software for Windows 10, 8, 7 Scanner Downloads

For my testing, I set up the Epson WorkForce DS-30 on my Windows View system. The settings are mostly basic, including installing motorists as well as other software and after that attaching the provided USB wire, which gives power in addition to an information link. A quick Start Guide likewise tells you to calibrate before scanning, just saying that the instruction is in the Individual guide on the disk. These two new actions are higher than a little aggravating. Preferably, both should be constructed right into the installment program itself. As a result of that shortage, a flying start guide needs to give you specific new guidelines, rather than to allow you to battle on your own. Therefore, it makes the setup natural feeling unfinished, and some individuals may have issues with one or both actions. Epson said it would undoubtedly include calibration instructions to the QuickStart guide in succeeding printing and include the mention of the Vehicle driver Update utility. However, it can not predict when the later publication.

Read More: Epson WorkForce WF-3540 Driver Software for Windows 10, 8, 7 Scanner Downloads

The Epson WorkForce DS-30 includes an array of software application, including Abbyy FineReader Sprint 9.0 for optical personality acknowledgment (Optical Character Recognition), NewSoft Presto! BizCard 5.0 for Calling card administration, and also Twain and WIA motorists. The Vehicle driver will deal with virtually any kind of program with a scan command to ensure that you can check directly into the program. Epson likewise includes the Epson Check energies and Epson File Capture Pro for scanning. Epson Scan lets you save data in JPG style, PDF photos, as well as various other picture styles. File Capture Pro supplies a checklist of comparable layouts, adding a multi-page Tiff. Nonetheless, I argue that this is less valuable as a scanning utility than it is due to its capacity to send out data to an FTP website or EverNote, Google docs, or Microsoft SharePoint. Also worth stating is that it will undoubtedly send data currently on your disk drive, not just the freshly checked papers.

Compatibility: Windows XP 32bit / Windows XP 64bit / Windows Vista 32bit / Windows Vista 64bit / Windows 7 32bit / Windows 7 64bit / Windows 8 32bit / Windows 8 64bit / Windows 8.1 /Linux / Mac OS

How To Setup Epson WorkForce DS-30 For Scanner

  1. For the beginning, you need to download the setup file for installing the driver of this printer.
  2. After you download the file, you need to find the location where you download the file and run the setup file that you have downloaded before.
  3. When the installation wizard pops up, you need to follow all of the instructions and provide the information that is asked when the installation wizard prompts.
  4. After you provide all of the necessary information, the installation process of the Epson WorkForce DS-30 will be started immediately.
  5. After some minutes, the installation process will be finished, and you will get the notification from the installation wizard.
  6. You need to close the wizard after that and restart your computer before you start using the printer. For your information, restarting your computer is important enough to make sure that you have installed the driver of the printer correctly.

How To Setup Epson WorkForce DS-30 For Firmware

  1. For the beginning, you will need the setup file for this printer. You can download the file that you need from the official website of Epson.
  2. After you downloaded the setup file, you need to run the record as the administrator. This one is important because you will not want to deal with any problems if you are not running the setup file as the administrator. Therefore, make sure you do not forget that.
  3. After you run the setup file, you need to follow all of the instructions on the installation wizard that will pop up later on. This is the main point of installing the Epson WorkForce DS-30.
  4. After the wizard is completed, you will notice that the installation process is starting.
  5. After waiting for some minutes, the installation will be finished, and you can use the printer immediately.

How To Setup Epson WorkForce DS-30 For Wireless

  1. For a start, you need the setup file. You can download the setup file for this printer from many different sources, but make sure you are downloading the correct setup file that you need.
  2. After you have downloaded the setup file, you need to search for the location where you downloaded the setup file before.
  3. After you find the setup file, you need to run the setup file as the administrator. This one is rather important to prevent the problems that might occur later on during the installation of the driver.
  4. After you do that, the new wizard will pop up. You need to follow the wizard to install the Epson WorkForce DS-30 to your computer.
  5. After you finish everything on the wizard, the installation will start automatically, and you need to wait for it to end. After that, you can use the printer for printing anything that you want.

How To Setup Epson WorkForce DS-30 Manual Installations

  1. The first thing that you need to do is downloading the setup file that you will need to install the driver of this printer. You can only find the file that you are looking for on the official website of Epson. Or else, you can also search for the necessary file from the internet. That is because some sites will provide you with the file that you are looking for.
  2. The second thing that you need to do is running the file that you have downloaded earlier. Before you run the record, it is recommended for you to scan the data for the virus, especially if you download the file from some other websites other than the official website of Epson.
  3. After you run the file, the installation wizard will pop up, and you are ready to do the Epson WorkForce DS-30 manual install when the installation wizard asks you to input some information such as the location that you want to install the driver and the components that you want to install.
  4. After all of those things are done, the installation process will be started. You need to wait for some minutes for the installation process to be finished. When the installation process is completed, you will be notified.

How To Setup Epson WorkForce DS-30 Driver For Windows

  1. The first thing that you need to do is turning on the printer. Since this printer is automatically switching on the Bluetooth itself, you do not need to do it on your own. Just let the printer does its job.
  2. After you turn on the printer, you need to connect the Bluetooth of your phone with the printer. You can do this by going to the connection setting on your phone setting. From there, you will find the option to pair your phone to another device. Choose that option.
  3. From there, you will be able to find the printer name on the possible list after you scan for the available devices. Choose the printer to continue the Epson WorkForce DS-30 Bluetooth
    setup.
  4. Once everything is done, you need to pick the document of the photo that you want to a pint. Pick the option to send the text or picture that you want to print to using the Bluetooth connection earlier. Make sure you send it to the Epson WorkForce DS-30 printer, or the printing process will not start.
  5. Once the process is done, the printer will start printing automatically.

How To Setup Epson WorkForce DS-30 Driver For CD/DVD

  1. For a start, you need the setup file for this printer. If you do not have the setup file, you can download the file from many online websites. Make sure the website is trusted.
  2. The next thing that you need to do is running the setup file, and after that, the installation wizard will pop up.
  3. On the installation wizard, you will be asked some details about the installation of this printer’s driver. Make sure you provide the necessary information.
  4. After you do that, the installation process will be started automatically, and you need to wait for some minutes before the installation of Epson WorkForce DS-30 is finished.
  5. When the installation is finished, you can use the printer immediately. For your consideration, it will be better if you restart your computer first because you need to make sure that the driver is installed correctly.

Epson WorkForce DS-30 Driver Downloads

Name Type Download
Scanner Driver and EPSON Scan Utility v3.6.8.10
Recommended
Scanner Driver and EPSON Scan Utility v3.6.8.10
Drivers
Dropbox Connector v1.00.02 for Document Capture Pro v2.xx
Utilities
Scanner Driver and EPSON Scan Utility v3.6.8.10
Utilities
Document Capture Pro v2.00.04
Utilities
SharePoint Online Connector v1.0.1.5 for Document Capture Pro 1.05 or later
Utilities
OneNote Connector v1.00 for Document Capture Pro v1.00
Utilities
EPSON Scan OCR Component v3.00.04
Utilities
Dropbox Connector v1.0.1.5 for Document Capture Pro v1.xx
Utilities
FileBound Connector v1.0.1.5 for Document Capture Pro v1.00.01
Utilities

Leave a Reply

Your email address will not be published. Required fields are marked *